Wednesday, September 4, 2013

Little Book of Earrings

My sister is about to embark upon a one-and-a-half year long volunteer mission trip for the LDS (Mormon) church, and in light of that, she's been doing tons of shopping and etc.

One thing that she found and absolutely fell in love with was a 'Little Book of Earrings'. Of course, with that price point, not to mention the international shipping to deal with, she asked me to make her one. This is my attempt to do so, and I'd say it turned out pretty well.

 Unlike most of my projects that I post on here, this was a multi-day process, if only because I had to wait for glue to dry.
 All this project took was some felt (color of choice), the sleeve from an old leather jacket, card stock, white Elmer's glue, and a sewing machine.

And some scissors, pins, thread, etc that you always need...
 So, to start with, I go felt. roughly paper-sized sheets can be found anywhere, I got mine at Micheal's.

I started by folding a sheet of felt over and sticking a piece of card stock in the middle, to form one page of the book (I thought).
 I then pinned it on tight, so there wasn't any slipping going on with the card stock and felt, and sewed it.
 I tried to use a rather small seam, but that's up to you. what you should make sure you do, though, is to practice before you actually sew. Try sewing with different tensions, stitch lengths, etc. This gets especially important when it comes time to sew the leather on later. Everything you're going to be sewing is thicker and tougher than normal materials, so just keep that in mind.
I also sewed around the edges for good measure and a better look, and this is what I came up with. I thought the page looked a bit big, so I folded it in half.
 Which, of course, formed two pages. My thought on this pic was that I would, as in the original product, bore holes for each pair of earrings to go. However, I adjusted that thought, thinking she can put her own earrings in, but this was still the best pic I had of the folded-over page.
With two sheets and four pages done, I decided it was enough, and started the binding process. For those of you who've never bound a book, or seen one bound,  you want to be careful, because you need a big, long needle to get through, you can't have your stitches too close to each other, and stitching too many times can weaken the binding, rather than strengthening it.

 This is what the binding looked like when I was done. I used doubled-over thread, and I glued the ends to keep them from going anywhere.

 I then started making the cover. I cut out two pieces of card stock a bit bigger than the pages, like so. I didn't want too much overlap, but you might want a bit more than this.
After that, I got a sheet of white felt, wrapped it around, and sandwiched it in with the two pieces of card stock.
 I wanted this tight, wince this is going to be the cover.
 I then glued the card stock onto the felt, and stuck the whole thing under a box of books overnight to dry. sorry, but the pics I tried to take of that step didn't come out super well.
 After it was done drying, I attached the pages to the cover by sewing. Once again, I used the 'X' pattern. Note that it was much harder this time to get through all of the layers.
 I trimmed the excess white felt, and voila! the book is done.

As long as you don't mind 'done' meaning 'ugly', etc.
 This is the inside, currently.

 Now I started on the pretty part of the cover. This piece of leather is from an old leather jacket of one of my sisters, but you could use sheet leather from a craft store, fabric, or whatever you want.
 This is its size relative to the book.
 It wraps around a little more than 3 times. Perfect, since my sister wants a flap closure.
 To attach this was a bit of a process. First, I positioned it,
 Then I glued the card stock onto the leather, and let it sit overnight again to dry.
 I then trimmed the excess leather around the edges. I wanted to sew the sides under, so I left about half an inch on all sides, but you could be done here.
 The flap closure is still small, so I'll have to trim it.
 This is after I sewed it. As you can see, I'm by no means a professional at this, but I think it worked pretty well.
 I extended the back cover seams all the way down, so when I wrap it around, it should be the right width now.
 Like I said, everyone makes mistakes. My sister is ok with this, though. Or she hasn't noticed it. Try to avoid folding over your leather, because it's a mess to try to fix.
 Here's the length before I trimmed it.
 Here's the length she said she wanted it trimmed to.
 Here's me having cut it into a rounded closure flap. I decided not to hem this one, since leather doesn't fray, and hemming rounded leather just looks bad.

 It was all good, except that it had no way of staying closed.
 This is the book open.
I solved the closure problem with some velcro. I sewed this on, as you can sort of see.

And there we go! Your very own 'Little Book of Earrings".

Enjoy!

Sunday, August 25, 2013

Hooded Cowl

Now entirely sure I'd ever wear this except for a costume, but I made this thinking it'd turn out more.. normal-ish... than it did. In any case,  here goes.

 Here is my rather awful attempt at a self-portrait via my phone. Apparently, the front-facing camera isn't nearly as good as the rear-facing one, but it shows essentially what it looks like.

This scarf wraps around my neck twice, with the hood centered at the back.
 I started out with some of this cloth, which you probably have already recognized from my scrap pile I used to make this scarf a while ago.
 To measure, I cut out a piece about long enough to fit around my face once.
It settled to about this length.
 I then doubled that length. Running out of green cloth, and my red not being quite long enough, I improvised. Don't worry about that extra seam.
 Wrapped around, this is what it looks like. Not bad, as cowls go, though I'd probably make it more tubular if I were doing this as more than a mock-up of the final.
 To make a hood, I folded a rectangle in half into a square (sort of), then sewed one side.
Flipping it right-side-out and putting it on (with the sewed edge at back), this is what the hood looks like. Next time to make it slightly deeper.
I sewed this onto the middle of the red section of my scarf, with the seams all on the same side.

And this is the result!

When I made a better (tubular, hemmed on the hood) one, out of flowy grey cloth, and a deeper hood.. it ended up looking slightly more like a cosplay item than something I'd actually wear in public, but that might just be due to the color/material. Feel free to comment with links to your takes on this.

Sunday, August 11, 2013

Tricolor Infinity Scarf

I've been making a few infinity scarves lately, but it only just this morning occurred to me to post about them. So, I actually made a cooler one than normal to show you. It has stripes.

For those of you who don't know, infinity scarves are just circular tube scarves, but they're super comfy, and infinitely easier to work with than normal ones.

Note: it's important that you choose comfy fabrics for this. Remember that anything you make this out of will be right up on you neck, and near you face, so be conscious of that when you go to make a super chunky, heavy scarf in the middle of summer.
 This scarf was actually made from the scraps of the fabric left over from a quilt I made almost a year ago.
 After laying it out, I found that I didn't have enough to make a double-sided scarf like I wanted to at first, but I had three colors, all of which I like, so I improvised.
I had the right length of purple, and half the length of green and patterned, both the right width-
As you can see...
 So I cut them all in half. Now, I had enough fabric to make a scarf length-wise, if I sewed the pieces together long ways, but how to make it work?
 the important thing with scarves (or, at least, this kind of scarf) is that the ends have to be the same width. Otherwise it won't work very well.
 So even them out. Even if it means you have to re-cut the pieces.
 Like I said, I sewed the green and patterned pieces together to make one piece, twice as long.
 I then started attaching the pieces together. Having two strips of purple, but only one of patterned and one of green, I decided to stripe it.
 Make sure you sew the pieces with right sides together, so it ends up looking like this between each strip. For the green piece, it had now 'right' side, but I had given it one when I sewed the pieces together- the seam needs to be on the outside.
 Again, check how it looks between each strip you sew on.
 This is what it looked like when the strips were all sewed together.
 Like I said, infinity scarves are tubular. So, to make a tube of the fabric, you sew the two ends together. Again, make sure right sides are together.
 At this point, you should have a tube of inside-out fabric. So, reverse it so that the outside shows.

No pics of that, since I think it's pretty easy to figure out.
 Not comes the trickiest part of the whole project- finishing the tube. This mostly comes down to practice, but essentially, you're sewing the tube closed- inside out.

To do this, you get the two ends of the scarf, put them right sides together, and sew. At first this will be easy, but you will be sewing yourself into a corner, figuratively speaking. Just keep sewing until you can't anymore, then take it out of the machine. The result will be an almost completely sewed tube, with a tiny (hopefully) opening that you then need to stitch closed somehow.

I've heard there are two ways to do this- hand stitch it, so it looks like it was all done from the inside, or just top stitch it. Because my holes are usually only an inch or two across, I always opt for top stitching it with the machine, and just keep that part behind my hair.
 As you can see, it's pretty easy to hide that part. And, honestly, I usually keep the seam behind my hair anyway, because it looks better that way.
 That's what I top stitched. Looks amazing, I know. Good thing no one will ever see it.
And there we go! An awesome, tricolor scarf.

Tuesday, August 6, 2013

Tic Tac First Aid Kit

At the time I was making this, mini first aid kits seemed to be all the rage on the internet. I never got around to making a post from my project, though, so I appear to have missed my chance to go viral with everyone else. Oh, well.



OK. So this starts with my genius idea: straws with stuff in them.

More specifically, straws with ointments and etc in them, like Hydrocortisone cream and Triamcinolone.
So, following the last two pics, I measured out a section of straw to fit the tic-tac container, then squeezed the end with a pair of pliers, then used a pair of pliers to melt the end, which is what you see here.
As you can see, the straw section fits in there.

In order to fill these things, I had to put a bit in, squish it to the end, and repeat. it took longer than you'd believe, and was kinda messy, too.

Regardless, this is what melting the other end looked like. Not as pretty, due to not being able to grab it as well when it was full.
As you can see, definitely not as pretty. But don't cut off those drips, or your thing will leak.
This is how it fits.
I also made a straw with mini pills in it. Remember to label or color coordinate your kits. I used a skinny Sharpie to label mine.
And there it's sitting, waiting for buddies.

So, I made it a bunch, then rounded out the kit with about 6 band-aids, 4 alcohol swabs and tubes of bacitracin, hydrocortisone and triamcinolone. All the basics.

Good luck!